For a period of seven days after they are listed,
Exclusive Preview items are exclusively available to
purchase only by shoppers who have a Private Car Premium Membership.
If you already have a Private Car membership, please log-in to purchase this item.
If you do not and would like to get the first crack at all of the most desirable collectible inventory,
sign-up for a membership.
This is DCC Concepts ADS2FX 2 Universal DCC Decoder CDU Solenoid Drive (2-Way, Added Features). ADS-2fx is a high-performance, high feature level 2-output DCC accessory decoder with built-in CDU on every output designed to power Seep, Hornby, Peco and similar high current point motors properly and make sure they change every single time! ADS-2fx can be powered with either DC (for DC only layouts) or with DCC to give all the advantages of digital or computer control. ADS-2fx will tolerate a very wide DC input voltage or a wide track bus voltage range and guarantees to give superb results every time. Our specially designed approach to charging control means that power supply loading is very low on both DC or DCC layouts, and because it stores all the energy it needs on-board, when it changes your solenoids it will NOT drain important train-running power from your system. Wiring is also exceptionally simple as no added or secondary power supply is needed and ADS-2fx is designed to connect directly to track power or your accessory power bus. Understanding the wiring and connections is easy too, as they are also clearly printed onto the PCB so you will never forget how it should be done, even if working under the layout! Addressing is so easy that we call it learning rather than programming – there are no CVs to set and there is no need for special programming either – All it needs is the changing of a simple switch to make it ready to teach – once that is done all you need do it act as if you are already changing it at the address you want it to be, return the switch to the run position and its done. The ADS2-fx is easy to install, set up and connect to your layout systems: Screw connectors means no need to solder One power input point for all outputs Simple 3-wire output to the device being controlled 3 high power terminals for direct connection of point frogs and/or panel LEDs and/or signal 3 switch terminals with the option of one or two push-button switches Feedback / IO data is provided via a pair of solder-padCondition:
Factory New (C-9
)Operational Status: FunctionalOriginal Box:
DCC ConceptsModel Number:
HO ModernModel Type:
The Trainz SKU for this item is P12153079. Track: 12153079 - No Location Assigned - 001 - TrainzAuctionGroup00UNK - TDIDUNK