MTH 80-2212-1 HO Erie ALCO FA-1 A/B Diesel Locomotive Proto-Sound 3.0 #725A

MTH 80-2212-1 HO Erie ALCO FA-1 A/B Diesel Locomotive Proto-Sound 3.0 #725A

Skip to product information
1 of 10
Sold Out
This is MTH 80-2212-1 HO FA-1 w/PS3, Erie #725A. Alco FA-1 A/B set with Proto-Sound 3.0, Erie. A unit number: 725A. B unit number: 725B. The American Locomotive Company, one of the nation's premier steam locomotive builders, joined forces with Schenectady, New York neighbor General Electric to build the first standardized diesel-electric locomotives in the 1920s. But when the diesel revolution began in earnest after World War II, dependability problems with Alco's model 244 prime mover doomed the company to forever playing second fiddle to industry leader EMD.

The brawny good looks of Alco's FA and PA cab units, however, have endeared them to railfans and modelers for more than half a century. Designed to compete with EMD's FT four axel freight locomotive, the FA-1 contained many of the same design elements but used a new 12-cylinder 244 engine. Many would argue that Alco's FA-1 and successor FA-2 diesels were both handsomer and more powerful looking than their major competitors, EMD's F3 and F7 covered wagons. A signature feature of Alco cab units was the striking ribbed grille surrounding the headlight. And while FAs were sold primarily as freight haulers, like EMD's F-units they had room for a passenger-service steam generator at the rear of the engine compartment.

Built by Alco and EMD in New York between 1946 and 1959, the FA-1 was designed primarily to haul freight, as they did not have the space at the rear of the engine compartment to accommodate a passenger-service steam generator. Externally as well as mechanically the FA-1, designed by Ray Patten, appeared very similar to the ALCO PA models built around the same time period. Distinguishable from the FA-2, the FA-1's shutters were at the far end of the carboydy, this was later changed to accommodate the steam generator that would be placed behind the radiator.

M.T.H. is proud to present the HO FA-1 FA-1 in classic first-generation diesel paint schemes. These streamlined diesels will bring beauty and power to any HO layout. Each Alco FA-1 AB diesel set includes one twin-motored A unit and twin-motored B unit. The A unit has full directional lighting and both the A and B units feature 2 Scale Operating Kadee Compatible Coupler. Like all HO diesel locomotives, the set is equipped with the legendary power and performance of Proto-Sound 3.0.

Its key features are:
Intricately detailed ABS bodies
Metal chassis
Moveable roof fans
Metal body side grilles
Two engineer cab figures
Authentic paint scheme
Metal wheels and axles
RP25 metal wheels
Two operating Kadee compatible remote controlled Proto-Couplers
Prototypical Rule 17 lighting
Directionally controlled constant voltage LED headlights
Lighted cab interior
Illuminated number boards
Lighted marker lights
Powerful 5-pole precision flywheel equipped skew-wound balanced motor
Locomotive speed control in scale MPH increments
Operates on Code 70, 83 and 100 track
1:87 scale proportions
Proto-Sound 3.0 with The Digital Command System featuring: Freight yard Proto-Effects
Unit measures: 14 x 1 3/8 x 2 1/16
Operates on 22 radius curves

Proto-Sound 3.0 equipped locomotives can be controlled in command mode with any DCC compliant command control system. While the user won't have access to all of the incredible features of Proto-Sound 3.0, independent control over the locomotive is possible. This means you can continue to use your existing DCC controller to independently control your other DCC equipped locomotives in addition to your Proto-Sound 3.0 locomotive on the same track at the same time.

When using a DCC controller, the following Proto-Sound 3.0 locomotive features are accessible:
F0 Headlight
F1 Bell
F2 Whistle/Horn
F3 Start up/Shut down
F4 Rear coupler
F5 Front coupler
F6 Engine sounds on/off
F7 Sound volume
F8 Ditch lights auto/on/off
F9 Forward signal
F10 Reverse signal
F11 Grade crossing signal
F12 Cab light on/off
F13 Extended start up
F14 Extended shut down
F15 Rev up
F16 Rev down
F17 Coupler slack sound
F18 Coupler close
F19 One-shot Doppler
F20 Feature reset
F21 Idle sequence 1
F22 Idle sequence 2
F23 Idle sequence 3
F24 Ditch lights auto/on/off
F25 Brakes auto/off
F26 Cab chatter auto/off
F27 Clickety-clack auto/off
F28 Coupler slack sound

Condition: Factory New (C-9)
Operational Status: Functional
Original Box: Yes (P-9)

Manufacturer: MTH
Model Number: 80-2212-1
Road Name: Erie (ERIE)
MSRP: $489.95

Scale/Era: HO Scale
Model Type: Diesel Loco


The Trainz SKU for this item is P12069960.

Trainz Product Id: 12069960
WARNING: This product can expose you to chemicals including but not limited to lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
looking for parts for this product?

Looking for parts for this product?

View ho scale parts

Your order is professionally packed with high quality packing materials to offer the best possible protection during transit.  If something should go wrong, we insure all packages against both loss and damage. 

We’re committed to keeping our shipping prices low, and our delivery times fast. Our system will automatically choose the best carrier at the time of shipment to help us deliver the lowest prices possible.

The moment your order ships you will receive an automated email which provides confirmation of shipment.  For most shipping services you will also receive a tracking number and a link to a page where you can track your shipment.

Free shipping

We love happy customers and do our best to maintain a fair and hassle-free customer satisfaction policy. We will gladly repair or replace your item, issue a refund, or negotiate a partial credit.

Just contact us within 30 days of receipt of the item (or within 60 days if you are a Private Car member). Explain why the item does not meet your expectations and how you would like us to handle the issue. If your item has been damaged try to include a photograph of the actual damages. We'll do our absolute best to make you happy.

If you and Trainz decide that the best recourse is to return the item for refund or repair we will send you a pre-paid return shipping label. Make sure to include your contact and order information when you return your items. Once Trainz receives and inspects the items we will repair your item or issue a refund.

Trainz reserves the right to charge you:

  • Return shipping if an item is returned to Trainz.
  • 15% re-stocking fee if an item is not returned in its original condition.
  • Any carrier charges resulting from a refused shipment.

For International orders only:

  • Trainz does not refund shipping charges.
  • Customers are responsible for paying return shipping.

Our return policy may differ on our other marketplaces such as eBay. If your item was not purchased on Trainz.com, please review the return policy where your item was purchased.

If you have any questions, don't hesitate to Submit a Support Ticket

View full details